 |
||||
 |
 |
 |
 |
 |
Seamless infrared repairs, not patches!At Asphalt Restoration, Inc., we use the infrared process for
all of our repairs. With the infrared process we can achieve a
seamless repair that blends beautifully with the
existing pavement.With conventional sawcut and remove patching, cracks
usually form where the hot asphalt was placed against the
cold edge of the surrounding asphalt. Cracking does not occur with the infrared process because the edge of the repair area
is thermally bonded with the existing asphalt. Without cold joints, there is no point of weakness!Step by step process:
- Position infrared panel over area to be repaired.
- Wait approximately 15 minutes for pavement to become 280 degree hot mix again. Time varies by ambient temperature. Can be used in temperatures as cold as 10 degrees below zero. Our system emits true infrared rays, heating asphalt without burning or oxidizing.
- Rake area, remove top 1/4" of asphalt, scarify remaining asphalt and add surface asphalt to the proper grade. The material is then blended together and luted for proper elevation.
- Compact the area with a vibratory compactor, compacting the edges first to pinch the
seam. This creates a thermal bond with the existing pavement and eliminates any seams.- Let restored area cool before opening up to traffic.
Infrared repairs are ideal for repairing settlement, cracks, bumps, low spots, potholes, utility cuts, seam bonding and manhole cover ramping.
Commercial or residential, call today for more information or a free estimate.
(847) 438-8008
Home | Repair | Photos | Advantages | Contact | Recycling
Asphalt Restoration, Inc. 25787 Hillview Ct. Mundelein, IL 60060
Phone: 847-438-8008 Fax: 847-540-9984 Email: danbrowne@asphaltrestore.com
Copyright © 2009 - Asphalt Restoration, Inc. - All Rights Reserved
